Range Interface

Table 5-2 summarizes the methods of available through the Range interface.

Table 5-2 Summary of Range Methods; Package Range

Function	Summary
XmlDomRangeClone	Clone a range.
XmlDomRangeCloneContents	Clone contents selected by a range.
XmlDomRangeCollapse	Collapse range to either start point or end point.
XmlDomRangeCompareBoundaryPoints	Compare boundary points of two ranges.
XmlDomRangeDeleteContents	Delete content selected by a range.
XmlDomRangeDetach	Detach a range.
XmlDomRangeExtractContents	Extract contents selected by a range.
XmlDomRangeGetCollapsed	Return whether the range is collapsed.
XmlDomRangeGetCommonAncestor	Return deepest common ancestor node of two boundary points.
XmlDomRangeGetDetached	Return whether the range is detached.
XmlDomRangeGetEndContainer	Return range end container node.
XmlDomRangeGetEndOffset	Return range end offset.
XmlDomRangeGetStartContainer	Return range start container node.
XmlDomRangeGetStartOffset	Return range start offset.
XmlDomRangeIsConsistent	Return whether the range is consistent.
XmlDomRangeSelectNode	Select a node as a range.
XmlDomRangeSelectNodeContents	Define range to select node contents.
XmlDomRangeSetEnd	Set the end point.
XmlDomRangeSetEndBefore	Set the end point before a node.
XmlDomRangeSetStart	Set the start point.
XmlDomRangeSetStartAfter	Set the start point after a node.
XmlDomRangeSetStartBefore	Set the start point before a node.

XmlDomRangeClone

Clone a Range. Clones the range without affecting the content selected by the original range. Returns NULL if an error.

Syntax

xmlrange* XmlDomRangeClone(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlrange *) new range that clones the old one

XmlDomRangeCloneContents

Clone contents selected by a range. Clones but does not delete contents selected by a range. Performs the range consistency check and sets retval to an error code if an error.

Syntax

xmlnode* XmlDomRangeCloneContents(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlnode *) cloned contents

XmlDomRangeCollapse

Collapses the range to either start point or end point. The point where it is collapsed to is assumed to be a valid point in the document which this range is attached to.

Syntax

xmlerr XmlDomRangeCollapse(
   xmlctx *xctx, 
   xmlrange *range, 
   boolean tostart);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
tostart	IN	indicates whether to collapse to start (`TRUE`) or to end (`FALSE`)

Returns

(xmlerr) numeric return code

XmlDomRangeCompareBoundaryPoints

Compares two boundary points of two different ranges. Returns -1,0,1 depending on whether the corresponding boundary point of the range (range) is before, equal, or after the corresponding boundary point of the second range (srange). It returns ~(int)0 if two ranges are attached to two different documents or if one of them is detached.

Syntax

sb4 XmlDomRangeCompareBoundaryPoints(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlcmphow how, 
   xmlrange *srange, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
how	IN	`xmlcmphow` value; how to compare
srange	IN	range object with which to compare
xerr	OUT	numeric return code

Returns

(sb4) strcmp-like comparison result

XmlDomRangeDeleteContents

Delete content selected by a range. Deletes content selected by a range. Performs the range consistency check and sets retval to an error code if an error.

Syntax

xmlerr XmlDomRangeDeleteContents(
   xmlctx *xctx, 
   xmlrange *range);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object

Returns

(xmlerr) numeric return code

XmlDomRangeDetach

Detaches the range from the document and places it (range) in invalid state.

Syntax

xmlerr XmlDomRangeDetach(
   xmlctx *xctx, 
   xmlrange *range);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object

Returns

(xmlerr) numeric return code

XmlDomRangeExtractContents

Extract contents selected by a range. Clones and deletes contents selected by a range. Performs the range consistency check and sets retval to an error code if an error.

Syntax

xmlnode* XmlDomRangeExtractContents(
   xmlctx *xctx, 
   xmlrange *range,
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlnode *) extracted

XmlDomRangeGetCollapsed

Returns TRUE if the range is collapsed and is not detached, otherwise returns FALSE.

Syntax

boolean XmlDomRangeGetCollapsed(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(boolean) TRUE if the range is collapsed, FALSE otherwise

XmlDomRangeGetCommonAncestor

Returns deepest common ancestor node of two boundary points of the range if the range is not detached, otherwise returns NULL. It is assumed that the range is in a consistent state.

Syntax

xmlnode* XmlDomRangeGetCommonAncestor(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlnode *) deepest common ancestor node [or NULL]

XmlDomRangeGetDetached

Return whether the range is detached. Returns TRUE if the range is detached and is not NULL. Otherwise returns FALSE.

Syntax

ub1 XmlDomRangeGetDetached(
   xmlctx *xctx, 
   xmlrange *range);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object

Returns

(ub1) TRUE if the range is detached, FALSE otherwise

XmlDomRangeGetEndContainer

Returns range end container node if the range is not detached, otherwise returns NULL.

Syntax

xmlnode* XmlDomRangeGetEndContainer(
   xmlctx *xctx, 
   xmlrange *range,
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlnode *) range end container node [or NULL]

XmlDomRangeGetEndOffset

Returns range end offset if the range is not detached, otherwise returns ~(ub4)0 [the maximum ub4 value].

Syntax

ub4 XmlDomRangeGetEndOffset(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(ub4) range end offset [or ub4 maximum]

XmlDomRangeGetStartContainer

Returns range start container node if the range is valid and is not detached, otherwise returns NULL.

Syntax

xmlnode* XmlDomRangeGetStartContainer(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(xmlnode *) range start container node

XmlDomRangeGetStartOffset

Returns range start offset if the range is not detached, otherwise returns ~(ub4)0 [the maximum ub4 value].

Syntax

ub4 XmlDomRangeGetStartOffset(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(ub4) range start offset [or ub4 maximum]

XmlDomRangeIsConsistent

Return whether the range is consistent. Returns TRUE if the range is consistent: both points are under the same root and the start point is before or equal to the end point. Otherwise returns FALSE.

Syntax

boolean XmlDomRangeIsConsistent(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlerr *xerr);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
xerr	OUT	numeric return code

Returns

(ub1) TRUE if the range is consistent, FALSE otherwise

XmlDomRangeSelectNode

Sets the range end point and start point so that the parent node of this node becomes the container node, and the offset is the offset of this node among the children of its parent. The range becomes collapsed. It is assumed that the node is a valid node of its document. If the range is detached, it is ignored, and the range becomes attached.

Syntax

xmlerr XmlDomRangeSelectNode(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node

Returns

(xmlerr) numeric return code

XmlDomRangeSelectNodeContents

Sets the range start point to the start of the node contents and the end point to the end of the node contents. It is assumed that the node is a valid document node. If the range is detached, it is ignored, and the range becomes attached.

Syntax

xmlerr XmlDomRangeSelectNodeContents(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node

Returns

(xmlerr) numeric return code

XmlDomRangeSetEnd

Sets the range end point. If it has a root container other than the current one for the range, the range is collapsed to the new position. If the end is set to be at a position before the start, the range is collapsed to that position. Returns xmlerr value. according to the description where this type is defined. It is assumed that the start point of the range is a valid start point.

Syntax

xmlerr XmlDomRangeSetEnd(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node, 
   ub4 offset);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node
offset	IN	ending offset

Returns

(xmlerr) numeric return code

XmlDomRangeSetEndBefore

Sets the range end point before a node. If it has a root container other than the current one for the range, the range is collapsed to the new position. If the before node sets the end to be at a position before the start, the range is collapsed to new position. Returns xmlerr value according to the description where this type is defined. It is assumed that the start point of the range is a valid start point.

Syntax

xmlerr XmlDomRangeSetEndBefore(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node

Returns

(xmlerr) numeric return code

XmlDomRangeSetStart

Sets the range start point. If it has a root container other than the current one for the range, the range is collapsed to the new position. If the start is set to be at a position after the end, the range is collapsed to that position. Returns xmlerr value according to the description where this type is defined. It is assumed that the end point of the range is a valid end point.

Syntax

xmlerr XmlDomRangeSetStart(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node, 
   ub4 offset);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node
offset	IN	starting offset

Returns

(xmlerr) numeric return code

XmlDomRangeSetStartAfter

Sets the range start point after a node. If it has a root container other than the current one for the range, the range is collapsed to the new position. If the after node sets the start to be at a position after the end, the range is collapsed to new position. Returns xmlerr value according to the description where this type is defined. It is assumed that the end point of the range is a valid end point.

Syntax

xmlerr XmlDomRangeSetStartAfter(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node

Returns

(xmlerr) numeric return code

XmlDomRangeSetStartBefore

Sets the range start point before a node. If it has a root container other than the current one for the range, the range is collapsed to the new position with offset 0. If the before node sets the start to be at a position after the end, the range is collapsed to new position. Returns xmlerr value according to the description where this type is defined. It is assumed that the end point of the range is a valid end point.

Syntax

xmlerr XmlDomRangeSetStartBefore(
   xmlctx *xctx, 
   xmlrange *range, 
   xmlnode *node);

Parameter	In/Out	Description
xctx	IN	XML context
range	IN	range object
node	IN	XML node

Returns

(xmlerr) numeric return code