| Oracle® Database Client Installation Guide 11g Release 1 (11.1) for Linux Part Number B32003-01 |
|
|
View PDF |
| Oracle® Database Client Installation Guide 11g Release 1 (11.1) for Linux Part Number B32003-01 |
|
|
View PDF |
This chapter describes the tasks that you must complete before you start Oracle Universal Installer. It includes information about the following tasks:
Note:
This guide contains information required to install Oracle Database 11g release 1 (11.1) on various platforms of Linux. Ensure that you review information related to the platform on which you intend to install Oracle Database 11g.Before you install the Oracle software, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:
Note:
Unless you intend to complete a silent-mode installation, you must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.For more information about silent-mode installations, refer to Appendix A.
If you are installing the software from an X Window System workstation or X terminal, then:
Start a local terminal session, for example, an X terminal (xterm).
If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:
$ xhost fully_qualified_remote_host_name
For example:
$ xhost somehost.us.example.com
If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:
$ telnet fully_qualified_remote_host_name
If you are not logged in as the root user, then enter the following command to switch user to root:
$ sudo sh password: #
If you are installing the software from a PC or other system with X server software installed, then:
Note:
If necessary, refer to the X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.Start the X server software.
Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.
Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).
If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:
$ sudo sh password: #
The system must meet the following minimum hardware requirements for Oracle Database Client 11g release1:
The following are the memory requirements for Oracle Database Client 11g release1:
At least 256 MB of physical RAM.
To determine the physical RAM size, enter the following command:
# grep MemTotal /proc/meminfo
If the size of the physical RAM is less than the required size, then you must install more memory before continuing.
The following table describes the relationship between installed RAM and the configured swap space requirement:
| Available RAM | Swap Space Required |
|---|---|
| Between 257 MB and 512 MB | Double the size of RAM |
| Between 513 MB and 2048 MB | 1.5 times the size of RAM |
| Between 2049 MB and 8192 MB | Equal to the size of RAM |
| More than 8192 MB | 0.75 times the size of RAM |
To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
If necessary, refer to the operating system documentation for information about how to configure additional swap space.
To determine the available RAM and swap space, enter the following command:
# free
Note:
Oracle recommends that you take multiple values for the available RAM and swap space before freezing on a value. This is because the available RAM and swap space keep changing depending on the user interactions with the computer.The following are the disk space requirements for Oracle Database Client 11g release1:
The minimum disk space requirement for a client install in the /tmp directory is 130 MB.
To determine the amount of disk space available in the /tmp directory, enter the following command:
# df -k /tmp
If there is less than 400 MB of free disk space available in the /tmp directory, then complete one of the following steps:
Delete unnecessary files from the /tmp directory to meet the disk space requirement.
Set the TMP and TMPDIR environment variables when setting the oracle user's environment (described later).
Extend the file system that contains the /tmp directory. If necessary, contact the system administrator for information about extending file systems.
Between 34 MB and 820 MB of disk space for the Oracle software, depending on the installation type
To determine the amount of free disk space available, enter the following command:
# df -k
The following are the recommended CPU, Memory and Display requirements for SQL Developer.
| Resource | Recommended |
|---|---|
| CPU Type and Speed | Pentium IV 2 GHz or faster |
| Memory | 1 GB RAM (recommended), 256 MB RAM (min) |
| Display | 65536 colors, set to at least 1024 X 768 resolution |
Depending on the products that you intend to install, verify that the following softwares are installed on the system.
Note:
Oracle Universal Installer performs checks on the system to verify that it meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer.
The following are the operating sytem requirements for Oracle Database Client 11g release1:
Asianux 2.0
Asianux 3.0
Oracle Enterprise Linux 4.0
Oracle Enterprise Linux 5.0
Red Hat Enterprise Linux 4.0
Red Hat Enterprise Linux 5.0
SUSE Enterprise Linux 10.0
To determine the distribution and version of Linux installed, enter the following command:
# cat /proc/version
Note:
Only the distributions and versions listed in the earlier itemized list are supported. Do not install the software on other versions of Linux.The following are the Kernel requirements for Oracle Database Client 11g release1:
For Asianux 2, Oracle Enterprise Linux 4.0, and Red Hat Enterprise Linux 4.0:
2.6.9
For Asianux 3, Oracle Enterprise Linux 5.0, and Red Hat Enterprise Linux 5.0:
2.6.18
For SUSE 10:
2.6.16.21
To determine whether the required kernel is installed, enter the following command:
# uname -r
The following is a sample output displayed by running this command on a Red Hat Enterprise Linux 4.0 system:
2.6.9-34.0.1.0.11.ELsmp
In this example, the output shows the kernel version (2.6.9) and errata level (34.0.1.0.11) on the system.
If the kernel version does not meet the requirement specified earlier in this section, then contact the operating system vendor for information about obtaining and installing kernel updates.
The following are the list of packages requirements for Oracle Database Client 11g release1.
| Item | Requirement |
|---|---|
| Packages for Asianux 2, Oracle Enterprise Linux 4.0, and Red Hat Enterprise Linux 4.0 | The following packages (or later versions) must be installed:
binutils-2.15.92.0.2-18 compat-libstdc++-33.2.3-47.3 elfutils-libelf-0.97-5 elfutils-libelf-devel-0.97-5 glibc-2.3.9.4-2.19 glibc-common-2.3.9.4-2.19 glibc-devel-2.3.9.4-2.19 gcc-3.4.5-2 gcc-c++-3.4.5-2 libaio-devel-0.3.105-2 libaio-0.3.105-2 libgcc-3.4.5 libstdc++-3.4.5-2 libstdc++-devel-3.4.5-2 make-3.80-5 sysstat-5.0.5 unixODBC-2.2.11 unixODBC-devel-2.2.11 |
| Packages for Asianux 3, Oracle Enterprise Linux 5.0, and Red Hat Enterprise Linux 5.0 | The following packages (or later versions) must be installed:
binutils-2.17.50.0.6-2.el5 compat-libstdc++-33-3.2.3-61 elfutils-libelf-0.125-3.el5 elfutils-libelf-devel-0.125 glibc-2.5-12 glibc-common-2.5-12 glibc-devel-2.5-12 gcc-4.1.1-52 gcc-c++-4.1.1-52 libaio-0.3.106 libaio-devel-0.3.106 libgcc-4.1.1-52 libstdc++-4.1.1 libstdc++-devel-4.1.1-52.e15 make-3.81-1.1 sysstat-7.0.0 unixODBC-2.2.11 unixODBC-devel-2.2.11 |
| SUSE Linux Enterprise Server 10 | The following packages (or later versions) must be installed:
binutils-2.16.91.0.5 compat-libstdc++-5.0.7 glibc-2.4-31.2 glibc-devel-2.4-31.2 gcc-4.1.0 ksh-93r-12.9 libaio-0.3.104 libaio-devel-0.3.104 libelf-0.8.5 libgcc-4.1.0 libstdc++-4.1.0 libstdc++-devel-4.1.0 make-3.80 sysstat-6.0.2 unixODBC-2.2.11 unixODBC-devel-2.2.11 |
Note:
If you did not perform a default Linux installation, you intend to use LDAP, and you want to use the scriptsodisrvreg, oidca, or schemasync, then install the Korn shell RPM for your Linux distribution.To determine whether the required packages are installed, enter commands similar to the following:
# rpm -q package_name
If a package is not installed, then install it from the Linux distribution media or download the required package version from the Linux vendor's Web site.
The following are the compiler requirements for Pro*C/C++ , Oracle Call Interface, Oracle C++ Call Interface, and Oracle XML Developer's Kit (XDK) with Oracle Database 11g release 1:
Intel C++ Compiler 9.1 or later and the version of GNU C and C++ compilers listed under "Package Requirements" are supported with these products.
Note:
Intel Compiler v9.1 can be used only with gcc 3.4.5 or gcc 4.0 or gcc 4.1 standard template libraries to build Oracle C++ Call Interface (OCCI) applications.Oracle XML Developer's Kit is supported with the same compilers as OCCI.
Depending on the components you want to use, you must ensure that the following software are installed:
You should install ODBC Driver Manager for UNIX. You can download and install the Driver Manager from the following URL:
You can use the following optional JDK versions with the Oracle JDBC/OCI drivers. However, these are not mandatory for the installation:
Sun JDK 1.4.2_08 with the JNDI extension
Sun JDK 1.5.0-06 with the JNDI extension
Oracle Messaging Gateway supports the integration of Oracle Streams Advanced Queuing (AQ) with the following software:
IBM WebSphere MQ V5.3, client and server, with corrective service diskette 5 (CSD05) or later:
MQSeriesClient MQSeriesServer MQSeriesRuntime
If you require a CSD for WebSphere MQ, then refer to the following Web site for download and installation information:
Web browsers must support Java Script and the HTML 4.0 and CSS 1.0 standards. The following browsers meet these requirements:
The following Web browsers are supported for Oracle Application Express:
Microsoft Internet Explorer 6.0 or later version
Firefox 1.0 or a later version
The following Web browsers are supported for Oracle Enterprise Manager Database Control:
Netscape Navigator 7.2
Netscape Navigator 8.1
Mozilla version 1.7
Microsoft Internet Explorer 6.0 SP2
Microsoft Internet Explorer 7.0
Firefox 1.0.4
Firefox 1.5
Firefox 2.0
In addition to the requirements described in the preceding section, if you plan to use Instant Client Light, then the applications must use the following languages and character sets:
Language: Any language that is supported by Oracle
Territory: Any territory that is supported by Oracle
Character sets:
The language, territory, and character sets are determined by the NLS_LANG environment variable.
Depending on whether this is the first time Oracle software is being installed on this system and on the products that you are installing, you may need to create the following operating system group and user:
The Oracle Inventory group (oinstall)
You must have a group whose members are given access to write to the Oracle Central Inventory (oraInventory). The Central Inventory contains the following:
A registry of the Oracle home directories (Oracle Clusterware, Oracle Database, and Automatic Storage Management) on the system.
Installation logs and trace files from installations of Oracle software. These files are also copied to the respective Oracle homes for future reference.
Other metadata inventory information regarding Oracle installations are stored in the individual Oracle home inventory directories, and are separate from the Central Inventory.
For new installations, Oracle recommends that you allow OUI to create the Central Inventory directory. By default, if you create an Oracle path in compliance with OFA structure, such as /u01/app, then the Central Inventory is created in the path u01/app/oraInventory, using correct permissions to allow all Oracle installation owners to write to this directory.
The Oracle software owner user (typically, oracle)
You must create this user the first time you install Oracle software on the system. This user owns all of the software installed during the installation. This user must have the Oracle Inventory group as its primary group. It must also have the OSDBA and OSOPER groups as secondary groups.
Note:
IOracle documentation, this user is referred to as theoracle user.A single Oracle Inventory group is required for all installations of Oracle software on the system. After the first installation of Oracle software, you must use the same Oracle Inventory group for all subsequent Oracle software installations on that system. However, you can choose to create different Oracle software owner users for separate installations.
Note:
The following sections describe how to create local users and groups. As an alternative to creating local users and groups, you could create the appropriate users and groups in a directory service, for example, Network Information Services (NIS). For information about using directory services, contact the system administrator or refer to the operating system documentation.The following sections describe how to create the required operating system users and groups:
You must create the Oracle Inventory group if it does not already exist. The following subsections describe how to determine the Oracle Inventory group name, if it exists, and how to create it if necessary.
Determining Whether the Oracle Inventory Group Exists
When you install Oracle software on the system for the first time, Oracle Universal Installer creates the oraInst.loc file. This file identifies the name of the Oracle Inventory group (typically, oinstall), and the path of the Oracle Inventory directory. An oraInst.loc file has contents similar to the following:
inventory_loc=central_inventory_location inst_group=group
In the preceding example, central_inventory_location is the location of the Oracle Central Inventory, and group is the name of the group that has permissions to write to the central inventory.
If you have an existing Oracle Inventory, then ensure that you use the same Oracle Inventory for all Oracle software installations, and ensure that all Oracle software users you intend to use for installation have permissions to write to this directory.
To determine whether the Oracle Inventory group exists, enter the following command:
# more /etc/oraInst.loc
If the oraInst.loc file exists, then the output from this command is similar to the following:
inventory_loc=/u01/app/oraInventory inst_group=oinstall
In the previous output example:
The inventory_loc group shows the location of the Oracle Inventory
The inst_group parameter shows the name of the Oracle Inventory group (in this example, oinstall).
Creating the Oracle Inventory Group
If the oraInst.loc file does not exist, then enter the following command to create the Oracle Inventory group:
# /usr/sbin/groupadd oinstall
You must create an Oracle software owner user in the following circumstances:
If an Oracle software owner user does not exist, for example, if this is the first installation of Oracle software on the system
If an Oracle software owner user exists, but you want to use a different operating system user
To determine whether an Oracle software owner user named oracle exists, enter the following command:
# id oracle
If the oracle user exists, then the output from this command is similar to the following:
uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
If the user exists, then determine whether you want to use the existing user or create another oracle user. If you want to use the existing user, then ensure that the user's primary group is the Oracle Inventory group. Refer to one of the following sections for more information:
Note:
If necessary, contact the system administrator before using or modifying an existing user.If you want to use the existing Oracle software owner user, and the user's primary group is the Oracle Inventory group, then refer to the "Identifying Required Software Directories" section.
To modify an existing user, refer to the "Modifying an Oracle Software Owner User" section.
To create a user, refer to the following section.
If the Oracle software owner user does not exist or if you require a new Oracle software owner user, then create it as follows. In the following procedure, use the user name oracle unless a user with that name already exists.
To create the oracle user, enter a command similar to the following:
# /usr/sbin/useradd -g oinstall[ -G dba]oracle
In this command:
The -g option specifies the primary group, which must be the Oracle Inventory group, for example oinstall
The -G option specifies optional secondary groups, the OSOPER group.For example dba.
Set the password of the oracle user:
# passwd oracle
Refer to the "Identifying Required Software Directories" section to continue.
You must identify or create the following directories for the Oracle software:
The Oracle base directory is a top-level directory for Oracle software installations. It is analogous to the C:\Oracle directory used for Oracle software installations on Microsoft Windows systems. On Linux systems, the Optimal Flexible Architecture (OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:
/mount_point/app/oracle_sw_owner
mount_point is the mount point directory for the file system that will contain the Oracle software.
The examples in this guide use /u01 for the mount point directory. However, you could choose another mount point directory, such as /oracle or /opt/oracle.
oracle_sw_owner is the operating system user name of the Oracle software owner, for example oracle.
You need to specify the ORACLE_BASE folder that contains all Oracle products.
Note:
If you have an existing Oracle base, then you can select it from the Use existing drop down box. By default, the drop down box contains the existing value for Oracle base selected.If you do not have an Oracle base, then you can create a new one by editing the text in the list box.
You can use the same Oracle base directory for more than one installation or you can create separate Oracle base directories for different installations. If different operating system users install Oracle software on the same system, then each user must create a separate Oracle base directory. The following example Oracle base directories could all exist on the same system:
/u01/app/oracle /u01/app/orauser /opt/oracle/app/oracle
The following sections describe how to identify existing Oracle base directories that may be suitable for the installation and how to create an Oracle base directory if necessary.
Regardless of whether you create an Oracle base directory or decide to use an existing one, you must set the ORACLE_BASE environment variable to specify the full path to this directory.
The Oracle Inventory directory (oraInventory) stores an inventory of all software installed on the system. It is required by, and shared by, all Oracle software installations on a single system. If you have an existing Oracle Inventory path, then Oracle Universal Installer continues to use that Oracle Inventory.
The first time you install Oracle software on a system, Oracle Universal Installer checks to see if you have created an OFA-compliant path in the format u[01-09]/app, such as /u01/app, and that the user running the installation has permissions to write to that path. If this is true, then Oracle Universal Installer creates the Oracle Inventory directory in the path /u[01-09]/app/oraInventory. For example:
/u01/app/oraInventory
If you have set the environment variable $ORACLE_BASE for the oracle user, then Oracle Universal Installer creates the Oracle Inventory directory in the path $ORACLE_BASE/../oraInventory. For example, if $ORACLE_BASE is set to /opt/oracle/11, then the Oracle Inventory directory is created in the path /opt/oracle/oraInventory.
If you have created neither an OFA-compliant path nor set $ORACLE_BASE, then the Oracle Inventory directory is placed in the home directory of the user that is performing the installation. For example:
/home/oracle/oraInventory
Oracle Universal Installer creates the directory that you specify and sets the correct owner, group, and permissions for it. You do not need to create it.
Note:
All Oracle software installations rely on this directory. Ensure that you back it up regularly.Do not delete this directory unless you have completely removed all Oracle software from the system.
The Oracle home directory is the directory where you choose to install the software for a particular Oracle product. You must install different Oracle products, or different releases of the same Oracle product, in separate Oracle home directories. When you run Oracle Universal Installer, it prompts you to specify the path to this directory, as well as a name that identifies it. The directory that you specify must be a subdirectory of the Oracle base directory. Oracle recommends that you specify a path similar to the following for the Oracle home directory:
$ORACLE_BASE/product/11.1.0/client_1
Oracle Universal Installer creates the directory path that you specify under the Oracle base directory. It also sets the correct owner, group, and permissions on it. You do not need to create this directory.
Caution:
During installation, you must not specify an existing directory that has predefined permissions applied to it as the Oracle home directory. If you do, then you may experience installation failure due to file and group ownership permission errors.Before starting the installation, you must either identify an existing Oracle base directory or if required, create one. This section contains information about the following:
Note:
You can choose to create an Oracle base directory, even if other Oracle base directories exist on the system.Existing Oracle base directories may not have paths that comply with OFA guidelines. However, if you identify an existing Oracle Inventory directory or existing Oracle home directories, then you can usually identify the Oracle base directories, as follows:
Identifying an existing Oracle Inventory directory
Enter the following command to view the contents of the oraInst.loc file:
# more /etc/oraInst.loc
If the oraInst.loc file exists, then the output from this command is similar to the following:
inventory_loc=/u01/app/oraInventory inst_group=oinstall
The inventory_loc parameter identifies the Oracle Inventory directory (oraInventory). The parent directory of the oraInventory directory is typically an Oracle base directory. In the previous example, /u01/app/oracle is an Oracle base directory.
Identifying existing Oracle home directories
Enter the following command to view the contents of the oratab file:
# more /etc/oratab
If the oratab file exists, then it contains lines similar to the following:
*:/u03/app/oracle/product/11.1.0/db_1:N *:/opt/orauser/infra_904:N *:/oracle/9.2.0:N
The directory paths specified on each line identify Oracle home directories. Directory paths that end with the user name of the Oracle software owner that you want to use are valid choices for an Oracle base directory. If you intend to use the oracle user to install the software, then you could choose one of the following directories from the previous example:
/u03/app/oracle /oracle
Note:
If possible, choose a directory path similar to the first (/u03/app/oracle). This path complies with the OFA guidelines.Identifying existing Oracle base directories
After you have located the Oracle home directory you can issue the following command to confirm the location of Oracle base:
cat inventory/ContentsXML/oraclehomeproperties.xml
To continue:
If an Oracle base directory exists and you want to use it, then refer to the "Configuring the oracle User's Environment" section.
When you configure the oracle user's environment later in this chapter, set the ORACLE_BASE environment variable to specify the directory you chose.
If an Oracle base directory does not exist on the system or if you want to create an Oracle base directory, then refer to the following section.
Before you create an Oracle base directory, you must identify an appropriate file system with disk space
To identify an appropriate file system:
To determine the free disk space on each mounted file system use the following command:
# df -k
From the display, identify a file system that has appropriate free space.
Note the name of the mount point directory for the file system that you identified.
To create the Oracle base directory and specify the correct owner, group, and permissions for it:
Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:
# mkdir -p /mount_point/app # chown -R oracle:oinstall /mount_point/app # chmod -R 775 /mount_point/app/
For example:
# mkdir -p /u01/app # chown -R oracle:oinstall /u01/app # chmod -R 775 /u01/app/
When you configure the oracle user's environment later in this chapter, set the ORACLE_BASE environment variable to specify the Oracle base directory that you have created.
You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer you must configure the environment of the oracle user. To configure the environment, you must:
Note:
Ensure that thePATH variable contains $ORACLE_HOME/bin before /usr/X11R6/bin.To set the oracle user's environment:
Start a new terminal session, for example, an X terminal (xterm).
Enter the following command to ensure that X Window applications can display on this system:
$ xhost fully_qualified_remote_host_name
For example:
$ xhost somehost.us.example.com
If you are not already logged in to the system where you want to install the software, then log in to that system as the oracle user.
If you are not logged in as the oracle user, then switch user to oracle:
$ su - oracle
To determine the default shell for the oracle user, enter the following command:
$ echo $SHELL
Open the oracle user's shell startup file in any text editor:
Bash shell (bash) on SUSE:
$ vi .profile
Bourne shell (sh), Bash shell on Red Hat (bash), or Korn shell (ksh):
$ vi .bash_profile
C shell (csh or tcsh):
% vi .login
Enter or edit the following line, specifying a value of 022 for the default file mode creation mask:
umask 022
If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the appropriate lines from the file.
Save the file, and exit from the editor.
To run the shell startup script, enter one of the following commands:
Bash shell:
$ . ./.bash_profile
Bourne or Korn shell:
$ . ./.profile
C shell:
% source ./.login
If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:
Bourne, Bash, or Korn shell:
$ DISPLAY=local_host:0.0 ; export DISPLAY
C shell:
% setenv DISPLAY local_host:0.0
In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).
If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:
To determine the free disk space on each mounted file system, use the following command:
# df -k
If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
$ sudo mkdir /mount_point/tmp $ sudo chmod a+wr /mount_point/tmp # exit
Enter commands similar to the following to set the TMP and TMPDIR environment variables:
Bourne, Bash, or Korn shell:
$ TMP=/mount_point/tmp $ TMPDIR=/mount_point/tmp $ export TMP TMPDIR
C shell:
% setenv TMP /mount_point/tmp % setenv TMPDIR /mount_point/tmp
Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:
Bourne, Bash, or Korn shell:
$ unset ORACLE_HOME $ unset TNS_ADMIN
C shell:
% unsetenv ORACLE_HOME % unsetenv TNS_ADMIN
Note:
If theORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.To verify that the environment has been set correctly, enter the following commands:
$ umask $ env | more
Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.
