client_handler.cpp exposes all the things I've been hinting at. Pay special attention to the decision made in open() as well as the bit of cleverness in svc().
// page05.html,v 1.13 1999/09/22 03:13:39 jcej Exp
/* In client_handler.h I alluded to the fact that we'll mess around
with a Client_Acceptor pointer. To do so, we need the
Client_Acceptor object declaration.
We know that including client_handler.h is redundant because
client_acceptor.h includes it. Still, the sentry prevents
double-inclusion from causing problems and it's sometimes good to
be explicit about what we're using.
On the other hand, we don't directly include any ACE header files
here. */
#include "client_acceptor.h"
#include "client_handler.h"
/* Our constructor doesn't do anything. That's generally a good idea.
Unless you want to start throwing exceptions, there isn't a really
good way to indicate that a constructor has failed. If I had my
way, I'd have a boolean return code from it that would cause new to
return 0 if I failed. Oh well... */
Client_Handler::Client_Handler (void)
{
}
/* Our destructor doesn't do anything either. That is also by design.
Remember, we really want folks to use destroy() to get rid of us.
If that's so, then there's nothing left to do when the destructor
gets invoked. */
Client_Handler::~Client_Handler (void)
{
}
/* The much talked about destroy() method! The reason I keep going on
about this is because it's just a Bad Idea (TM) to do real work
inside of a destructor. Although this method is void, it really
should return int so that it can tell the caller there was a
problem. Even as void you could at least throw an exception which
you would never want to do in a destructor. */
void
Client_Handler::destroy (void)
{
/* Tell the reactor to forget all about us. Notice that we use the
same args here that we use in the open() method to register
ourselves. In addition, we use the DONT_CALL flag to prevent
handle_close() being called. Since we likely got here due to
handle_close(), that could cause a bit of nasty recursion! */
this->reactor ()->remove_handler (this,
ACE_Event_Handler::READ_MASK
| ACE_Event_Handler::DONT_CALL);
/* This is how we're able to tell folks not to use delete. By
deleting our own instance, we take care of memory leaks after
ensuring that the object is shut down correctly. */
delete this;
}
/* As mentioned before, the open() method is called by the
Client_Acceptor when a new client connection has been accepted.
The Client_Acceptor instance pointer is cast to a void* and given
to us here. We'll use that to avoid some global data... */
int
Client_Handler::open (void *void_acceptor)
{
/* We need this to store the address of the client that we are now
connected to. We'll use it later to display a debug message. */
ACE_INET_Addr addr;
/* Our ACE_Svc_Handler baseclass gives us the peer() method as a way
to access our underlying ACE_SOCK_Stream. On that object, we can
invoke the get_remote_addr() method to get get an ACE_INET_Addr
having our client's address information. As with most ACE methods,
we'll get back (and return) a -1 if there was any kind of error.
Once we have the ACE_INET_Addr, we can query it to find out the
client's host name, TCP/IP address, TCP/IP port value and so
forth. One word of warning: the get_host_name() method of
ACE_INET_Addr may return you an empty string if your name server
can't resolve it. On the other hand, get_host_addr() will always
give you the dotted-decimal string representing the TCP/IP
address. */
if (this->peer ().get_remote_addr (addr) == -1)
return -1;
/* Convert the void* to a Client_Acceptor*. You should probably use
those fancy ACE_*_cast macros but I can never remember how/when to
do so. Since you can cast just about anything around a void*
without compiler warnings be very sure of what you're doing when
you do this kind of thing. That's where the new-style cast
operators can save you. */
Client_Acceptor *acceptor = (Client_Acceptor *) void_acceptor;
/* Our Client_Acceptor is constructed with a concurrency strategy.
Here, we go back to it to find out what that strategy was. If
thread-per-connection was selected then we simply activate a
thread for ourselves and exit. Our svc() method will then begin
executing in that thread.
If we are told to use the single-threaded strategy, there is no
difference between this and the Tutorial 5 implementation.
Note that if we're in thread-per-connection mode, open() is exited
at this point. Furthermore, thread-per-connection mode does not
use the reactor which means that handle_input() and it's fellows
are not invoked. */
if (acceptor->thread_per_connection ())
return this->activate (THR_DETACHED);
// ************************************************************************
// From here on, we're doing the traditional reactor thing. If
// you're operating in thread-per-connection mode, this code does
// not apply.
// ************************************************************************
/* Our reactor reference will be set when we register ourselves but
I decided to go ahead and set it here. No good reason really... */
this->reactor (acceptor->reactor ());
/* If we managed to get the client's address then we're connected to
a real and valid client. I suppose that in some cases, the client
may connect and disconnect so quickly that it is invalid by the
time we get here. In any case, the test above should always be
done to ensure that the connection is worth keeping.
Now, regiser ourselves with a reactor and tell that reactor that
we want to be notified when there is something to read. Remember,
we took our reactor value from the acceptor which created us in
the first place. Since we're exploring a single-threaded
implementation, this is the correct thing to do. */
if (this->reactor ()->register_handler (this,
ACE_Event_Handler::READ_MASK) == -1)
ACE_ERROR_RETURN ((LM_ERROR,
"(%P|%t) can't register with reactor\n"),
-1);
/* Here, we use the ACE_INET_Addr object to print a message with the
name of the client we're connected to. Again, it is possible that
you'll get an empty string for the host name if your DNS isn't
configured correctly or if there is some other reason that a
TCP/IP addreess cannot be converted into a host name. */
ACE_DEBUG ((LM_DEBUG,
"(%P|%t) connected with %s\n", addr.get_host_name ()));
/* Always return zero on success. */
return 0;
}
/* As mentioned in the header, the typical way to close an object in a
threaded context is to invoke it's close() method. Since we
already have a handle_close() method built to cleanup after us,
we'll just forward the request on to that object. */
int
Client_Handler::close(u_long flags)
{
ACE_UNUSED_ARG (flags);
/* We use the destroy() method to clean up after ourselves. That
will take care of removing us from the reactor and then freeing
our memory. */
this->destroy ();
/* Don't forward the close() to the baseclass! handle_close() above
has already taken care of delete'ing. Forwarding close() would
cause that to happen again and things would get really ugly at
that point! */
return 0;
}
/* In the open() method, we registered with the reactor and requested
to be notified when there is data to be read. When the reactor
sees that activity it will invoke this handle_input() method on us.
As I mentioned, the _handle parameter isn't useful to us but it
narrows the list of methods the reactor has to worry about and the
list of possible virtual functions we would have to override.
Again, this is not used if we're in thread-per-connection mode. */
int
Client_Handler::handle_input (ACE_HANDLE handle)
{
/* Some compilers don't like it when you fail to use a parameter.
This macro will keep 'em quiet for you. */
ACE_UNUSED_ARG (handle);
/* Now, we create and initialize a buffer for receiving the data.
Since this is just a simple test app, we'll use a small buffer
size. */
char buf[BUFSIZ];
/* Invoke the process() method with a pointer to our data area.
We'll let that method worry about interfacing with the data. You
might choose to go ahead and read the data and then pass the
result to process(). However, application logic may require that
you read a few bytes to determine what else to read... It's best
if we push that all into the application-logic level. */
return this->process (buf, sizeof (buf));
}
/* If we return -1 out of handle_input() or if the reactor sees other
problems with us then handle_close() will be called. The reactor
framework will take care of removing us (due to the -1), so we
don't need to use the destroy() method. Instead, we just delete
ourselves directly. */
int
Client_Handler::handle_close (ACE_HANDLE handle,
ACE_Reactor_Mask mask)
{
ACE_UNUSED_ARG (handle);
ACE_UNUSED_ARG (mask);
this->destroy ();
return 0;
}
/* The ACE_Svc_Handler<> is ultimately derived from ACE_Task<>. If
you want to create a multi-threaded application, these are your
tools! Simply override the svc() method in your derivative and
arrange for your activate() method to be called. The svc() method
then executes in the new thread.
Of course, this is only valid if we're in thread-per-connection
mode. If we're using the reactor model, then svc() never comes
into play. */
int
Client_Handler::svc(void)
{
/* Like handle_input(), we create a buffer for loading the data.
Doing so in handle_input() doesn't help any but there is a small
performance increase by doing this here: the buffer is created
once when the thread is created instead of for each invocation of
process(). */
char buf[BUFSIZ];
// Forever...
while( 1 )
{
/* Invoke the process() method to read and process the data.
This is exactly the way it is used by handle_input(). That's
the reason I created process() in the first place: so that it
can be used in either concurrency strategy. Since process()
has all of our application-level logic, it's nice that it
doesn't have to change when we decide to go multi-threaded.
Notice that since the recv() method call in process() blocks until
there is data ready, this thread doesn't consume any CPU time until
there is actually data sent from the client. */
if (this->process(buf, sizeof (buf)) == -1)
return -1;
}
return 0;
}
/* And, at last, we get to the application-logic level. Out of
everything we've done so far, this is the only thing that really
has anything to do with what your application will do. In this
method we will read and process the client's data. In a real
appliation, you will probably have a bit more in main() to deal
with command line options but after that point, all of the action
takes place here. */
int
Client_Handler::process (char *rdbuf,
int rdbuf_len)
{
/* Using the buffer provided for us, we read the data from the
client. If there is a read error (eg -- recv() returns -1) then
it's a pretty good bet that the connection is gone. Likewise, if
we read zero bytes then something wrong has happened. The reactor
wouldn't have called us if there wasn't some kind of read activity
but there wouldn't be activity if there were no bytes to read...
On the other hand, if we got some data then we can display it in a
debug message for everyone to see. */
switch (this->peer ().recv (rdbuf, rdbuf_len))
{
case -1:
ACE_ERROR_RETURN ((LM_ERROR,
"(%P|%t) %p bad read\n",
"client"),
-1);
case 0:
ACE_ERROR_RETURN ((LM_ERROR,
"(%P|%t) closing daemon (fd = %d)\n",
this->get_handle ()),
-1);
default:
ACE_DEBUG ((LM_DEBUG,
"(%P|%t) from client: %s",
rdbuf));
}
return 0;
}
Did you notice the THR_DETACHED flag on the call to activate()? Threads, like any system resource, are a limited resource. Unless we intend to join() or wait() for the new thread later, we want use THR_DETACHED so that we don't cause a leak. In fact, in most cases, you'll want to specify THR_DETACHED because it's just easier.
Another handy flag for use with activate() is THR_NEW_LWP. That's short for Light Weight Process. If you've got a multiprocessor, this flag will allocate a new schedulable process and decrease the odds of your threads all fighting for the same process. Of course, if you have a uni-processor, it will neither help nor hurt. Since I developed these on a uni-processor, I've been a bit inconsistent in the use of THR_NEW_LWP.
Well, that's it! After all the talk & the hype, you would have expected it to be more difficult to create a multi-threaded server. Surprise! It really is that easy. You still have to handle contention issues which we haven't addressed here and that is a rather nasty topic. Still, for the simple case, this is all you have to do.
The next page is the last for this tutorial. Head on over there & we'll round up the file list one last time.