Installation ============ These are installation instructions for Unix and Unix-like systems that can run the "configure" script in this same directory. These are not the installation instructions for Windows systems; see README.win32 for those instructions. 0. This is alpha software. Beware. 1. If you wish to build Ethereal, make sure you have GTK+ and GLIB installed. Try running 'gtk-config --version' and 'glib-config --version' to see if you have them installed. Ethereal needs versions 1.2.0 or above of both these packages. If you need to install or re-install GTK+ or GLIB, you can find the packages at: http://www.gtk.org If you installed GTK+ from a binary package, you may have to install a "development" package; there may be separate "user's" and "developer's" packages, with the former not including header files and the like. For example, Red Hat users will need to install a "gtk-devel" .rpm. 2. If you wish to build Tethereal, the line-mode version of Ethereal, make sure you have GLIB installed. See note #1 above for instructions on checking if you have GLIB installed. You can download GLIB from the same site as GTK. 3. If you want to capture packets, make sure you have libpcap installed. The latest "official" version can be found at http://www.tcpdump.org . If you've downloaded the 0.5.2 version, make sure you install the headers ('make install-incl') when you install the library. The CVS snapshots will install the headers if you do 'make install', and have no 'install-incl' target. If you installed libpcap from a binary package, you may have to install a "development" package; for example, there's apparently a "libpcap0" Debian package, but it just includes a shared library, a copyright notice, changelog files, and a README file - you also need to install a "libpcap-dev" package to get header files, a non-shared library, and the man page. Similarly, Red Hat 5.x users will need to install a "libpcap-devel" .rpm to go along with the "libpcap" .rpm. 4. Run './configure' in the Ethereal distribution directory. Running './configure --help' displays a list of options. The file 'INSTALL.configure' contains general instructions for using 'configure' and 'make'. Ethereal has some non-generic configure options: --sysconfdir=DIR Ethereal installs a support file (manuf) in ${PREFIX}/etc by default, where ${PREFIX} comes from --prefix=DIR. If you do not specify any --prefix option, ${PREFIX} is "/usr/local". You can change the location of the manuf file with the --sysconfdir option. --disable-usr-local By default 'configure' will look in /usr/local/{include,lib} for additional header files and libraries. Using this switch keeps 'configure' from looking there --disable-ethereal By default, if 'configure' finds the GTK+ libraries, the Makefile build Ethereal, the GUI packet analyzer. You can disable the build of the GUI version of Ethereal with this switch. --disable-tethereal By default the line-mode packet analyzer, Tethereal, is built. Use this switch to avoid building it. --disable-editcap By default the capture-file editing program is built. Use this switch to avoid building it. --disable-mergecap By default the capture-file merging program is built. Use this switch to avoid building it. --disable-text2pcap By default the hex-dump-to-capture file conversion program is built. Use this switch to avoid building it. --disable-idl2eth By default the IDL-to-ethereal-dissector-source-code converter is built. Use this switch to avoid building it. --enable-dftest By default the display-filter-compiler test program is not built. Use this switch to build it. --enable-randpkt By default the program which creates random packet-capture files is not built. Use this switch to build it. --without-pcap If you chose to build a packet analyzer that can analyze capture files but cannot capture packets on its own, but you *do* have libpcap installed, use --without-pcap to avoid using libpcap. --with-pcap=DIR Use this tell Ethereal where you have libpcap installed, if in a non-standard location. --disable-zlib By default, if 'configure' finds zlib (a.k.a, libz), the wiretap library will be built so that it can read compressed capture files. If you have zlib but do not wish to build it into the wiretap library, used by Ethereal, Tethereal, and the capture-file utilities that come in this package, use this switch. --disable-ipv6 If 'configure' finds support for IPv6 name resolution on your system, the packet analyzers will make use of it. To avoid using IPv6 name resolution if you have the support for it, use this switch. --enable-setuid-install Use this switch to install the packet analyzers as setuid. Installating Ethereal and Tethereal as setuid 'root' is dangerous. Repeat: IT'S DANGEROUS. Don't do it. --with-ssl=DIR If your SNMP library needs the SSL library, and your SSL library is installed in a non-standard location, you can specify where your SSL library is with this switch. --disable-snmp If 'configure' finds a supported version of the UCD SNMP library on your system, the SNMP dissector will be enhanced to use routines from that SNMP library. Use this switch to avoid using the UCD SNMP library even if you have it installed. --with-ucdsnmp=DIR Tell the 'configure' script where your UCD SNMP library is located, if not in a standard location. --without-plugins By default, if your system can support run-time loadable modules, the packet analyzers are build with support for plugins. Use this switcht to build packet analyzers without plugin support. --with-plugins=DIR By default, plugins are installed in ${LIBDIR}/ethereal/plugins/${VERSION} ${LIBDIR} can be set with --libdir, or defaults to ${EPREFIX/lib} ${EPREFIX} can be set with --exec-prefix, or defaults to ${PREFIX} ${VERSION} is the Etherael version. Use this switch to change the location where plugins are installed. 5. After running './configure', you will see a summary of some of the options you chose. Ensure that the summary reflects what you want. If it doesn't, re-run './configure' with new options. 6. Run 'make'. Hopefully, you won't run into any problems. 7. Run './ethereal' or './tethereal', and make sure things are working. You must have root privileges in order to capture live data. 8. Run 'make install'. If you wish to install the man page, run 'make install-man'. If you're running a system that supports the Apt, RPM, or System V Release 4 packaging systems, you can run one of make debian-package # Builds a binary package using dpkg make rpm-package # Builds a binary package using rpm make srpm-package # Builds a source package using rpm make svr4-package # Builds a source package using pkgmk make solaris-package # Same as "make svr4-package" to make an installable package for your system. If you have trouble with the build or installation process, you can find assistance on the ethereal-users and ethereal-dev mailing lists. See http://www.ethereal.com/lists/ for details.