A
Heterogeneous Services Initialization Parameters

The Heterogeneous Services initialization parameter file contains configuration settings stored as a text file.

This section contains the following topics:

• HS_CALL_NAME
• HS_COMMIT_POINT_STRENGTH
• HS_DB_DOMAIN
• HS_DB_INTERNAL_NAME
• HS_DB_NAME
• HS_DESCRIBE_CACHE_HWM
• HS_FDS_CONNECT_INFO
• HS_FDS_DEFAULT_SCHEMA_NAME
• HS_FDS_SHAREABLE_NAME
• HS_FDS_TRACE_LEVEL
• HS_LANGUAGE
• HS_LONG_PIECE_TRANSFER_SIZE
• HS_NLS_DATE_FORMAT
• HS_NLS_DATE_LANGUAGE
• HS_NLS_NCHAR
• HS_NLS_NUMERIC_CHARACTER
• HS_NLS_TIMESTAMP_FORMAT
• HS_NLS_TIMESTAMP_TZ_FORMAT
• HS_OPEN_CURSORS
• HS_ROWID_CACHE_SIZE
• HS_RPC_FETCH_REBLOCKING
• HS_RPC_FETCH_SIZE
• HS_TIME_ZONE
• IFILE

  See Also: "Setting Initialization Parameters" contains instructions for setting the Heterogeneous Services initialization parameters "Configuring Generic Connectivity Agents" contains instructions for setting Heterogeneous Services initialization parameters specific to Generic Connectivity

HS_CALL_NAME

Property	Description
Default value	None
Range of values	Not applicable

Specifies the remote functions that can be referenced in SQL statements. The value is a list of remote functions and their owners, separated by semicolons, in the following format:

owner_name.function_name
 

For example:

owner1.A1;owner2.A2;owner3.A3 

If no owner name is specified for a remote function, then the default owner name is the user name used to connect to the remote database (specified when the HS database link is created).

The entries for the owner names and the function names are case-sensitive.

HS_COMMIT_POINT_STRENGTH

Property	Description
Default value	0
Range of values	0 to 255

Specifies a value that determines the commit point site in a heterogeneous distributed transaction. HS_COMMIT_POINT_STRENGTH is similar to COMMIT_POINT_STRENGTH, described in the Oracle Database Reference.

Set HS_COMMIT_POINT_STRENGTH to a value relative to the importance of the site that is the commit point site in a distributed transaction. The Oracle database server or non-Oracle system with the highest commit point strength becomes the commit point site. To ensure that a non-Oracle system never becomes the commit point site, set the value of HS_COMMIT_POINT_STRENGTH to zero.

HS_COMMIT_POINT_STRENGTH is important only if the non-Oracle system can participate in the two-phase protocol as a regular two-phase commit partner and as the commit point site. This is only the case if the transaction model is two-phase commit confirm (2PCC).

HS_DB_DOMAIN

Property	Description
Default value	WORLD
Range of values	1 to 199 characters

Specifies a unique network sub-address for a non-Oracle system. HS_DB_DOMAIN is similar to DB_DOMAIN, described in the Oracle Database Reference. HS_DB_DOMAIN is required if you use the Oracle Names server. HS_DB_NAME and HS_DB_DOMAIN define the global name of the non-Oracle system.

HS_DB_INTERNAL_NAME

Property	Description
Default value	01010101
Range of values	1 to 16 hexadecimal characters

Specifies a unique hexadecimal number identifying the instance to which the Heterogeneous Services agent is connected. This parameter's value is used as part of a transaction ID when global name services are activated. Specifying a nonunique number can cause problems when two-phase commit recovery actions are necessary for a transaction.

HS_DB_NAME

Property	Description
Default value	HO
Range of values	1 to 8 characters

Specifies a unique alphanumeric name for the data store given to the non-Oracle system. This name identifies the non-Oracle system within the cooperative server environment. HS_DB_NAME and HS_DB_DOMAIN define the global name of the non-Oracle system.

HS_DESCRIBE_CACHE_HWM

Property	Description
Default value	100
Range of values	1 to 4000

Specifies the maximum number of entries in the describe cache used by Heterogeneous Services. This limit is known as the describe cache high water mark. The cache contains descriptions of the mapped tables that Heterogeneous Services reuses so that it does not have to re-access the non-Oracle data store.

If you are accessing many mapped tables, then increase the high water mark to improve performance. Note that increasing the high water mark improves performance at the cost of memory usage.

HS_FDS_CONNECT_INFO

Property	Description
Default value	None
Range of values	Not applicable

Specifies the information needed to bind to the data provider, that is, the non-Oracle system. For Generic Connectivity, you can bind to an ODBC-based data source or to an OLE DB-based data source. The information that you provide depends on the platform and whether the data source is ODBC or OLE DB-based.

This parameter is required if you are using Generic Connectivity.

ODBC-Based Data Source on Windows

You can specify a file DSN (data source name) or a system DSN as follows:

HS_FDS_CONNECT_INFO=FILEDSN=dsn

ODBC-Based Data Source on UNIX

Use a DSN with the following format:

HS_FDS_CONNECT_INFO=dsn

OLE DB-Based Data Source (Windows NT Only)

Use a universal data link (UDL) with the following format:

HS_FDS_CONNECT_INFO="UDLFILE=data_link"

HS_FDS_DEFAULT_SCHEMA_NAME

Property	Description
Default value	None
Range of values	Not applicable

Specifies a default value for the owner column that will be returned in the ddtrans, when the value of the owner is null. For example:

HS_FDS_DEFAULT_SCHEMA_NAME = PUBLIC

HS_FDS_SHAREABLE_NAME

Property	Description
Default value	None
Range of values	Not applicable

Specifies the full path name to the ODBC library. This parameter is required when you are using Generic Connectivity to access data from an ODBC provider on a UNIX machine. If your ODBC driver requires an ODBC driver manager, then HS_FDS_SHAREABLE_NAME should point to the location of the ODBC driver manager and not to the ODBC driver.

HS_FDS_TRACE_LEVEL

Property	Description
Default value	OFF
Range of values	ON or OFF

Specifies whether error tracing is enabled or disabled for Generic Connectivity. Enable the tracing to see which error messages occur when you encounter problems. The results are written to a Generic Connectivity log file, in the /log directory under the $ORACLE_HOME directory.

HS_LANGUAGE

Property	Description
Default value	System-specific
Range of values	Any valid language name (up to 255 characters)

Provides Heterogeneous Services with character set, language, and territory information of the non-Oracle data source. The value must use the following format:

language[_territory.character_set]

Character Sets

Ideally, the character sets of the Oracle database server and the non-Oracle data source are the same. If they are not the same, Heterogeneous Services attempts to translate the character set of the non-Oracle data source to the Oracle database character set, and back again. The translation can degrade performance. In some cases, Heterogeneous Services cannot translate a character from one character set to another.

Language

The language component of the HS_LANGUAGE initialization parameter determines:

• Day and month names of dates
• AD, BC, PM, and AM symbols for date and time
• Default sorting mechanism

Note that Oracle does not determine the language for error messages for the generic Heterogeneous Services messages (ORA-25000 through ORA-28000). These are controlled by the session settings in the Oracle database server.

Territory

The territory clause specifies the conventions for day and week numbering, default date format, decimal character and group separator, and ISO and local currency symbols. Note that:

• You can override the date format using the initialization parameter HS_NLS_DATE_FORMAT.
• The level of globalization support between the Oracle database server and the non-Oracle data source depends on how the driver is implemented.

HS_LONG_PIECE_TRANSFER_SIZE

Property	Description
Default value	64 KB
Range of values	Any value up to 2 GB

Sets the size of the piece of LONG data being transferred. A smaller piece size means less memory requirement, but more round trips to fetch all the data. A larger piece size means fewer round trips, but more of a memory requirement to store the intermediate pieces internally. Thus, the initialization parameter can be used to tune a system for the best performance, with the best trade-off between round trips and memory requirements.

HS_NLS_DATE_FORMAT

Property	Description
Default value	Value determined by HS_LANGUAGE parameter
Range of values	Any valid date format mask (up to 255 characters)

Defines the date format for dates used by the target system. This parameter has the same function as the NLS_DATE_FORMAT parameter for an Oracle database server. The value of can be any valid date mask listed in the Oracle Database SQL Reference, but must match the date format of the target system. For example, if the target system stores the date February 14, 2001 as 2001/02/14, set the parameter to yyyy/mm/dd. Note that characters must be lowercase.

HS_NLS_DATE_LANGUAGE

Property	Description
Default value	Value determined by HS_LANGUAGE parameter
Range of values	Any valid NLS_LANGUAGE value (up to 255 characters)

Specifies the language used in character date values coming from the non-Oracle system. Date formats can be language independent. For example, if the format is dd/mm/yyyy, all three components of the character date are numbers. In the format dd-mon-yyyy, however, the month component is the name abbreviated to three characters. The abbreviation is very much language dependent. For example, the abbreviation for the month April is "apr", which in French is "avr" (Avril).

Heterogeneous Services assumes that character date values fetched from the non-Oracle system are in this format. Also, Heterogeneous Services sends character date bind values in this format to the non-Oracle system.

HS_NLS_NCHAR

Property	Description
Default value	Value determined by HS_LANGUAGE parameter
Range of values	Any valid national character set (up to 255 characters)

Informs Heterogeneous Services of the value of the national character set of the non-Oracle data source. This value is the non-Oracle equivalent to the NATIONAL CHARACTER SET parameter setting in the Oracle CREATE DATABASE statement. The HS_NLS_NCHAR value should be the character set ID of a character set supported by the Oracle NLSRTL library.

HS_NLS_NUMERIC_CHARACTER

Property	Description
Default value	Value determined by HS_LANGUAGE parameter
Range of values	Any valid NLS_NUMERIC_CHARACTERS value (any two valid numeric characters)

Specifies the characters to use as the group separator and the decimal character. The group separator separates integer groups (such as thousands, millions, and billions). The decimal character separates the integer portion of a number from the decimal portion.

HS_NLS_TIMESTAMP_FORMAT

Property	Description
Default value	Derived from NLS_TERRITORY
Range of values	Any valid datetime format mask

Defines the timestamp format for dates used by the target system. This parameter has the same function as the NLS_TIMESTAMP_FORMAT parameter for an Oracle database server. The value of can be any valid timestamp mask listed in the Oracle Database SQL Reference, but it must match the date format of the target system. Note that characters must be lowercase. For example:

HS_NLS_TIMESTAMP_FORMAT = yyyy-mm-dd hh:mi:ss.ff

HS_NLS_TIMESTAMP_TZ_FORMAT

Property	Description
Default value	Derived from NLS_TERRITORY
Range of values	Any valid datetime with time zone format mask

Defines the default timestamp with time zone format for the timestamp with time zone format used by the target system. This parameter has the same function as the NLS_TIMESTAMP_TZ_FORMAT parameter for an Oracle database server. The value of can be any valid timestamp with time zone mask listed in the Oracle Database SQL Reference, but must match the date format of the target system. Note that characters must be lowercase. For example:

HS_NLS_TIMESTAMP_TZ_FORMAT = yyyy-mm-dd hh:mi:ss.ff tzh:tzm

HS_OPEN_CURSORS

Property	Description
Default value	50
Range of values	1 to the value of Oracle's OPEN_CURSORS initialization parameter

Defines the maximum number of cursors that can be open on one connection to a non-Oracle system instance.

The value never exceeds the number of open cursors in the Oracle database server. Therefore, setting the same value as the OPEN_CURSORS initialization parameter in the Oracle database server is recommended.

HS_ROWID_CACHE_SIZE

Property	Description
Default value	3
Range of values	1 to 32767

Specifies the size of the Heterogeneous Services cache containing the non-Oracle system equivalent of ROWIDs. The cache contains non-Oracle system ROWIDs needed to support the WHERE CURRENT OF clause in a SQL statement or a SELECT FOR UPDATE statement.

When the cache is full, the first slot in the cache is reused, then the second, and so on. Only the last HS_ROWID_CACHE_SIZE non-Oracle system ROWIDs are cached.

HS_RPC_FETCH_REBLOCKING

Property	Description
Default value	ON
Range of values	OFF or ON

Controls whether Heterogeneous Services attempts to optimize performance of data transfer between the Oracle database server and the Heterogeneous Services agent connected to the non-Oracle data store.

The following values are possible:

• OFF disables reblocking of fetched data so that data is immediately sent from agent to server.
• ON enables reblocking, which means that data fetched from the non-Oracle system is buffered in the agent and is not sent to the Oracle database server until the amount of fetched data is equal or higher than HS_RPC_FETCH_SIZE. However, any buffered data is returned immediately when a fetch indicates that no more data exists or when the non-Oracle system reports an error.

HS_RPC_FETCH_SIZE

Property	Description
Default value	4000
Range of values	Decimal integer (byte count)

Tunes internal data buffering to optimize the data transfer rate between the server and the agent process.

Increasing the value can reduce the number of network round trips needed to transfer a given amount of data, but also tends to increase data bandwidth and to reduce response time or latency as measured between issuing a query and completion of all fetches for the query. Nevertheless, increasing the fetch size can increase latency for the initial fetch results of a query, because the first fetch results are not transmitted until additional data is available.

After the gateway is installed and configured, you can use the gateway to access non-Oracle database system data, pass non-Oracle database system commands from applications to the non-Oracle database system database, perform distributed queries, and copy data.

HS_TIME_ZONE

Property	Description
Default value for '[+|-]hh:mm'	Derived from NLS_TERRITORY
Range of values for '[+|-]hh:mm'	Any valid datetime format mask

Specifies the default local time zone displacement for the current SQL session. The format mask, [+|-]hh:mm, is specified to indicate the hours and minutes before or after UTC (Coordinated Universal Time--formerly Greenwich Mean Time). For example:

HS_TIME_ZONE = [+ | -] hh:mm

IFILE

Property	Description
Default value	None
Range of values	Valid parameter file names

Use IFILE to embed another initialization file within the current initialization file; the value should be an absolute path and should not contain environment variables; the three levels of nesting limit does not apply.