Release 9.2
Part Number A96574-01
 Home |
 Book List |
 Contents |
 Index |
 Master Index |
 Feedback |
| Oracle Internet Directory Administrator's Guide Release 9.2 Part Number A96574-01 |
|
Capacity planning is the process of assessing applications' directory access requirements and ensuring that the Oracle Internet Directory has adequate computer resources to service requests at an acceptable rate. This chapter explains what you need to consider when doing capacity planning. It guides you through an example of a directory deployment for an email messaging application in a hypothetical company called Acme Corporation
This chapter contains these topics:
If Oracle Internet Directory and the corresponding Oracle9i database are running on the same computer, then these are the configurable resources that capacity planners need to consider:
When you plan to acquire hardware for Oracle Internet Directory, you should ensure that all components--such as CPU, memory, and I/O--are effectively used. Generally, good memory usage and a robust I/O subsystem are sufficient to keep the CPU busy.
Any new installation of the Oracle Internet Directory needs two things to be successful:
We begin by looking at an example of a directory deployment for an email messaging application in a hypothetical company called Acme Corporation. As we examine each component of the capacity plan, we will apply our recommendations to the example of Acme Corporation.
The following terms are used throughout this chapter:
The overall rate at which directory operations are being completed by Oracle Internet Directory. This is typically represented as "operations every second."
The time a client has to wait for a given directory operation to complete
The total number of clients that have established a session with Oracle Internet Directory
The amount of concurrent operations that are being executed on the directory from all of the concurrent clients. Note that this is not necessarily the same as the concurrent clients because some of the clients may be keeping their sessions idle.
The ability to assess the potential load on Oracle Internet Directory is very important for developing an accurate capacity plan. Let us examine the email messaging software employed by our hypothetical company, Acme Corporation. The email messaging software in this example is based on Internet Message Access Protocol (IMAP). There are two main types of software that access Oracle Internet Directory:
Let us assume that the private aliases and private distribution lists of individual users are also stored in the directory. Let us further make the following assumptions, which will allow us to guess the size of the directory:
Based on these assumptions, we can derive the overall count of entries in Oracle Internet Directory as:
These assumptions will yield a directory population of about one million entries. Given the user population and the directory population, let us then analyze usage patterns so that we can derive performance requirements from them. A typical user tends to send an average of 10 emails everyday and receives an average of 10 emails a day from the outside world. Assuming that there are, on an average, five recipients for each email being sent by a user, this would result in five directory lookups for each email.
The following table summarizes all the possible directory lookups that can happen in one day:
Summing up, the total number of directory lookups everyday would be about 3,200,000 (3.2 million) directory lookups everyday. If these directory lookups were spread out uniformly along the day, it would require about 37 directory lookups every second (133,333 lookups every hour). Unfortunately, we will never have this case.
Usage analysis of the current email system over a period of 24 hours shows the pattern illustrated in Figure 18-1.
The email system and Oracle Internet Directory are maximally stressed in the mornings. There are other usage peaks as well--one close to lunch time, and one near the end of business day. However, it is in the mornings that the Oracle Internet Directory is stressed the most.
Let us assume that 90 percent of all the directory lookups happen during normal working hours. Let us now split up the working hour load into the following categories (assuming an 8 hour workday):
These calculations indicate that the Oracle Internet Directory in this case should be designed to handle the peak load of 936,000 lookups every hour.
Now that we know the data-set size as well as the performance requirements, we can now look into individual components of the installation and estimate good values for each.
This section contains these topics:
The I/O subsystem can be compared to a pump that pumps data to the CPUs to enable them to execute workloads. The I/O subsystem is also responsible for data storage. The main components of an I/O subsystem are arrays of disk drives controlled by disk controllers.
It is important to consider performance requirements when you size the I/O subsystem, rather than size based only on storage requirements. Although disk drives have increased in size, the throughput--that is, the rate at which the disk drive pumps data--has not increased in proportion. In sizing calculations for the I/O subsystem, you should use the following factors as input:
Given a range of I/O subsystems, you should always opt for the highest throughput drives. Typically, one can maximize the I/O throughput by one or more of the following techniques:
Some guidelines for organizing Oracle Internet Directory-specific data files are provided in Chapter 19, "Tuning Considerations". Depending on the tolerance of disk failures, different levels of Redundant Arrays of Inexpensive Disks (RAID) can also be considered.
Assuming that the decision has been made to get the best possible I/O subsystem, we focus the next section on deriving sizing estimates for the disks themselves.
You can use the following table to derive a rough estimate of the overall disk requirement:
| Number of Entries in DIT | Disk Requirements |
|---|---|
|
100,000 |
450MB to 650MB |
|
200,000 |
850MB to 1.5GB |
|
500,000 |
2.5GB to 3.5GB |
|
1,000,000 |
4.5GB to 6.5GB |
|
1,500,000 |
6.5GB to 10GB |
|
2,000,000 |
9GB to 13GB |
The data shown in the previous table makes the following assumptions:
Going back to our example of Acme Corporation, since our directory population is about one million, this would imply that our disk requirements are approximately 4.5 GB to 6.5 GB. Note that the assumptions made for Acme Corporation regarding the number of cataloged attributes are different, but the previous table should give an approximate figure of the size requirements.
Since the directory may be deployed for a wide variety of applications, these assumptions need not necessarily hold true for all possible situations: There might be cases where the size of attributes is large, the number of attributes for each entry is large, extensive use of ACIs has been made, or the number of cataloged attributes is very high. For such cases, we present simple arithmetic procedures in the following section which will allow the planners to get a more detailed perspective of their disk requirements.
Because Oracle Internet Directory stores all of its data in an Oracle9i database, the sizing for disk space is primarily a sizing of the underlying database. Oracle Internet Directory stores its data in the following tablespaces:
This section presents simple arithmetic procedures to determine the size requirements of each of the tablespaces shown earlier. All of the size calculations are based on the following variables:
Using the variables shown in the preceding table, the size of individual tablespaces can be calculated as follows:
Using the arithmetic operations shown in the preceding table, one can compute the exact space requirements for a wide variety of Oracle Internet Directory deployment scenarios. The sum of the sizes of each of the tablespaces should yield the overall database disk requirement. One can optionally multiply that by the "factor_of_safety" variable to get a figure that can compensate for unforeseen circumstances.
Going back to our example of Acme Corporation, we can assign values to each of the variables based on the requirements stated in previous sections. The following table illustrates the values of each variable introduced in this section for Acme Corporation.
If we now plug these values into the equations described earlier, we get the following values:
The previous table shows that the estimated size of the database for Acme Corporation would be about 8.25 GB. If all of the data is being loaded in bulk, then the bulkload tool of Oracle Internet Directory would require an additional 30 percent of space occupied by the database to store its temporary files. For Acme Corporation, this would add about 2.5 GB to the total space requirement.
Memory is used for a number of distinct tasks by any database application, including Oracle Internet Directory. If memory resources are insufficient for any of these tasks, the bottleneck causes the CPUs to work at lower efficiency and system performance to drop. Furthermore, memory usage increases in proportion to the number of concurrent connections to the database and the number of concurrent users of the directory.
The memory available to processes comes from the virtual memory on the system, which is somewhat more than available physical memory. If the sum of all active memory usage exceeds the available physical memory on the system, the operating system may need to store some of the memory pages on disk. This is called paging. Paging can degrade performance if memory is too oversubscribed. Generally, you should not exceed 20 percent over-subscription of physical memory. If paging occurs, you need either to scale back memory usage by processes or to add more physical memory. Keep in mind the trade-offs: There are physical limits to the amount of memory you can add, but scaling back on per-process memory usage can significantly degrade performance.
The main consumers of memory are the database buffer cache within the system global area (SGA) and the OID Server Entry Cache (if enabled). Getting a good hit ratio for the buffer cache and the entry cache requires allocating enough memory in each area. The following formula gives a rough estimate for the amount of RAM required to cache 'N' entries in the entry cache:
'N' * (attrs_per_entry + 6) * (avg_attrname_len + avg_attr_size + 72)
| See Also:
Chapter 19, "Tuning Considerations" for further information on SGA tuning |
The following table gives minimum memory requirements for different directory configurations:
| Directory Type | Entry Count | Minimum Memory |
|---|---|---|
|
Small |
Less than 600,000 |
512 MB |
|
Medium |
600,000 to 2,000,000 |
1 GB |
|
Large |
Greater than 2,000,000 |
2 GB |
Going back to our example of Acme Corporation, the number of entries in the directory are close to 1,000,000 (1 million). Oracle Corporation recommends choosing the 2 GB option in order to maximize performance.
The network is rarely a bottleneck in most installations. However serious consideration must be given to it during the capacity planning stage. If the clients do not get adequate network bandwidth to send and receive messages from Oracle Internet Directory, the overall throughput will seem to be very low. For example, if we have configured Oracle Internet Directory to service 800 search operations every second, but the computer running the Oracle directory server is only accessible through a 10 Mbps network (10-Base-T switched ethernet), and we have only 60 percent of the bandwidth available, then the clients will only see a throughput of 600 search operations a second (assuming each search operation causes 1024 bytes to be transferred on the network). The following table shows the maximum possible throughput (in operations every second) for two types of operations (one requiring a transfer of 1024 bytes the other requiring a transfer of 2048 bytes) for two types of networks, 10 Mbps & 100 Mbps, at different rates of bandwidth availability:
In some cases, it may also be important to consider the network latency of sending a message from a client to the Oracle directory server. In some WAN implementations, the network latencies may become as high as 500 milliseconds, which may cause the clients to time out for certain operations. In summary, given a range of networking options, the preferred choice should always be for highest bandwidth, lowest latency network.
Going back to the example of Acme Corporation, their peak usage rate is 936,000 lookups every hour which results in an equivalent number of lookup operations to the directory. This requires about 260 directory operations every second. Assuming that each operation results in a transfer of 2 KB of data on the network, this would imply that we should have a 100 Mbps network or at least 60 percent bandwidth available on a 10 Mbps network. Since the 100 Mbps network will typically have a lower latency, we will chose that over the 10 Mbps network.
This section contains these topics:
The CPU sizing for Oracle Internet Directory is directly a function of the user workload. The following factors will determine CPU configuration:
CPU resources can be added to a system as the workload increases, but these additions seldom bring linear scalability to all operations since a lot of operations are not purely CPU bound. We classify the processing power of a computer by a performance characteristic that is commonly available from all vendors, namely, SPECint_rate95 baseline. This number is derived from a set of integer tests and is available from all system vendors as well as the SPEC Web site (http://www.spec.org).
Because Oracle Internet Directory makes efficient use of multiple CPUs on an SMP computer, we chose to categorize computers based on their SPECint_rate95 numbers. Even within SPECint_rate95 we chose the baseline number as opposed to the commonly advertised result. This is because the commonly advertised result is actually the peak performance of a computer, whereas the baseline number represents the performance in normal circumstances.
Since Oracle Internet Directory is typically co-resident with the Oracle9i database, we recommend at least a two-CPU system. We give the following rough estimates based on the level of usage of Oracle Internet Directory:
It is difficult to determine the CPU requirements for all operations at a given deployment site since the amount of CPU consumed depends upon several factors, such as:
In most of the cases, except SSL, we can expect that there is a large latency between the Oracle Internet Directory server process and the database. When a thread in the Oracle Internet Directory server process is waiting for the database to respond, other threads within the Oracle Internet Directory server process can be put to work by other client requests needing LDAP server specific processing. As a result, for any mix of operations, one can always come up with a combination of concurrent clients and Oracle Internet Directory server processes that will result in 100 percent CPU utilization. In this case, the CPU becomes the bottleneck.
Given this fact, we have taken a 'messaging' type of subtree search operation and tried to estimate the CPU resources need to support a given number of concurrent operations without degrading the throughput of operations. The 'messaging' search operation involves subtree scope, a simple exact match filter and a result set of one entry. For Oracle Internet Directory Release 9.2:
SPECint_rate95 baseline = 0.5 * (max # of concurrent operations at peak throughput)
This means that, if we need to support 600 concurrent clients without degrading the throughput of operations, then we need a computer that has at least a SPECint_rate95 baseline rating of (0.5 * 600) = 300.
In terms of throughput of operations, for Oracle Internet Directory Release 9.2:
SPECint_rate95 baseline = 0.4 * (throughput of operations at max supported concurrency)
What this means is that if we need a throughput of 750 operations every second for the given maximum number of supported concurrent operations, then we need a computer that has at least a SPECint_rate95 baseline rating of (0.4 * 750) = 300.
It has been proven that Oracle Internet Directory scales very well with additional CPU resources. What this means is:
Going back to our example of Acme Corporation, let us assume that we want adequate CPU resources to support 500 concurrent 'messaging' type of subtree search operations with each client seeing subsecond latency. Taking a factor of safety of 20 percent, our preliminary estimate of CPU requirement would be a computer with a SPECint_rate95 baseline of at least 360.
In the preceding sections, we have described various components involved in capacity planning and have also shown how each of them would apply to an Oracle Internet Directory deployment at a hypothetical company named Acme Corporation. In this section we give a quick summary of all of the recommendations made. Following were the initial assumptions:
Based on these requirements and further assumptions, we developed the following recommendations:
Several simplifying assumptions were made so that the sizing calculations could be more intuitive.
|
 Copyright © 1999, 2002 Oracle Corporation. All Rights Reserved. |
|
